For those who were having trouble accessing my autopilot project photos, please try again here <https://drive.google.com/file/d/15LatTEDvhPfzOdZCXQxouq4ZMZKd5Xoe/view?usp=sharing> . Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA
~~~~~~~_/)~~~~~~ On Wed, Jun 6, 2018 at 10:30 PM, Gary Russell <captnga...@gmail.com> wrote: > On Kaylarah (37+) I had to reinforce the rudder assembly and then cut the > rudder tube to insert the Edson Rudder Arm. See here > <https://drive.google.com/open?id=1PxnlMnxH0HueWkyJDLNkBvv_0oWDnxlQ>. It > works extremely well. > > Gary > S/V Kaylarah > '90 C&C 37+ > East Greenwich, RI, USA > > ~~~~~~~_/)~~~~~~ > > > On Wed, Jun 6, 2018 at 1:38 PM, Don Marlin via CnC-List < > cnc-list@cnc-list.com> wrote: > >> My boat is a 1983 C&C 40 AC. The aft part should be similar to most C&C >> 40's. >> >> Thanks David. Specifically I was looking for ideas around the quadrant. >> Right now the quadrant is tight between the rudder tube and the deck and >> there is no space. I have seen others online who have used the existing >> quadrant but I view this as option B. So I like to see what others have >> done and then decide on the scope. Thanks Dave for the link, shelf looks >> good and will ado[pt some ideas. I plan to use an Octopus drive and >> Raymarine head. >> >> >> On Wed, Jun 6, 2018 at 12:00 PM, <cnc-list-requ...@cnc-list.com> wrote: >> >>> Send CnC-List mailing list submissions to >>> cnc-list@cnc-list.com >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> or, via email, send a message with subject or body 'help' to >>> cnc-list-requ...@cnc-list.com >>> >>> You can reach the person managing the list at >>> cnc-list-ow...@cnc-list.com >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of CnC-List digest..." >>> >>> >>> Today's Topics: >>> >>> 1. >>> >>> Re: Below deck auto pilot installation for C&C 40 (David) >>> >>> >>> ---------------------------------------------------------------------- >>> >>> Message: 1 >>> Date: Wed, 6 Jun 2018 15:59:12 +0000 >>> From: David <davidrisc...@msn.com> >>> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> >>> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >>> Message-ID: >>> <CY4PR16MB16538B32F89DCBCB7F319191DA650@CY4PR16MB1653.namprd >>> 16.prod.outlook.com> >>> >>> Content-Type: text/plain; charset="windows-1252" >>> >>> Dave...call my cell to discuss. >>> >>> >>> David F. Risch, J. D. >>> >>> Gulf Stream Associates, LLC >>> >>> (401) 419-4650 >>> >>> >>> ________________________________ >>> From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dave Godwin >>> via CnC-List <cnc-list@cnc-list.com> >>> Sent: Wednesday, June 6, 2018 11:50 AM >>> To: cnc-list@cnc-list.com >>> Cc: Dave Godwin; Don Marlin >>> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >>> >>> Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s >>> version?) is similar. I did this<http://roninrebuild.blogs >>> pot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect >>> but it works. >>> >>> Best, >>> Dave Godwin >>> 1982 C&C 37 - Ronin >>> Reedville - Chesapeake Bay >>> Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/> >>> >>> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List < >>> cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: >>> >>> I am starting to plan a below deck Autopilot for my C&C 40. I have >>> looked below and it is clear that I will need to make some modifications to >>> support a tiller arm. I was wondering if there are any other 40 owners who >>> could share pictures of their installations. Currently I have a wheel pilot >>> and it is good for motoring and light winds. Looking for something more >>> capable. >>> >>> Thanks in advance >>> >>> Don Marlin >>> >>> _______________________________________________ >>> >>> Thanks everyone for supporting this list with your contributions. Each >>> and every one is greatly appreciated. If you want to support the list - >>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>> >>> >>> -------------- next part -------------- >>> An HTML attachment was scrubbed... >>> URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachm >>> ents/20180606/dcb01df8/attachment-0001.html> >>> >>> ------------------------------ >>> >>> Subject: Digest Footer >>> >>> _______________________________________________ >>> CnC-List mailing list >>> CnC-List@cnc-list.com >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> ------------------------------ >>> >>> End of CnC-List Digest, Vol 149, Issue 21 >>> ***************************************** >>> >> >> >> >> -- >> Don Marlin >> (613) 832 4040 >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >> >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
