1. The holding tank is behind the head and under the locker shelf. All
the fitting are located on the top surface. The tank is shaped to fit
into this space and I believe the tank is original.
2. Model: Kracor R-6046
Tank top: 12.5 x 22
side view: 19h (cabinet)/5h (hull) x 12.5w (top)/5w (bottom)
Rod
C&C33-1
On 08/31/2018 04:55 PM, Dave. via CnC-List wrote:
SLY has been using a Type 1 Sanitation System but these are no longer legal in
Puget Sound so we need to install a holding tank. Yuck! I looked in our original
C&C manual and found a 15.5 gallon holding tank listed. Not sure if these were
standard issue or an option but SLY did not come to us with a holding tank. So my
questions are:
1. Where were the holding tanks installed?
2. What were there configuration? Dimensions?
3. Are these units or similar units available and from whom?
Thanks again for your collective thoughts.
Dave. Kaseler
SLY
1975 C&C 33
Sent from my iPad
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
