Thanks Frederick! I thought that it would be okay but have learned never to assume especially on the water! Do you use anything to keep the line from jumping the roller or has that not been a problem? Thank you, Sam
On Jan 21, 2019 4:42 PM, "Frederick G Street" <f...@postaudio.net> wrote: Sam — I typically anchor with the line over the roller. Same sort of setup as you have, but a larger Fortress; and we anchor in sand up in the Apostle Islands. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Jan 21, 2019, at 3:32 PM, Sam Tunanidas via CnC-List < cnc-list@cnc-list.com> wrote: I have a Landfall 38 with a double bow roller. I am in the northern Chesapeake Bay. I only use 10' of chain and the rest is 8 plait anchor line. The bottom around here is mostly mud and I get incredible holding power from my Fortress 23. My question is is it okay to just run the line over the bow roller then cleat it off or should I run the line through one of the port/starboard bow openings you run your dock lines through? Thanks in advance to all responders.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
