Hi!! Thank you all for the quick and precise answers! It is very appreciated!
Last question: what king of grease do you us in the grease cup? White grease? Have a good day! Camille Le mer. 24 avr. 2019 à 16:44, ssjohnson via CnC-List <cnc-list@cnc-list.com> a écrit : > Greetings Camille and welcome to the list! My LF38 has not had your > issue. But. When I upgraded the steering pedestal we found that the cockpit > sole had completely desalinated, so, we had about a 2'x3' piece of marine > plywood vacuum sealed with fiberglass resin and new holes drilled, with > edges sealed, for the pedestal and rudder post. In retrospect I had > noticed a puddle of rainwater accumulating around the rudder post. It was > about a $3,500 repair but needed to be done. > The grease cap is on the aft side of the lower rudder. I replaced it with > a grease fitting on a 5' hose leading to a bracket under the strbd > laserette. I add a squeeze once a year. BTW, I've removed and replaced > the rudder about 6 times. I finally had it rebuilt by competition > composites in Ottawa. Now it is only 150lbs instead of 300 :-o > Good luck, Camille! > Spencer Johnson > 84 LF 38 "Alegria " #165 > Racine, WI > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
