Cast acrylic from Laird Plastics in RI. Give them the old ones and they will replicate. ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Morgan Ellis via CnC-List <cnc-list@cnc-list.com> Sent: Tuesday, August 27, 2019 10:21:11 PM To: cnc-list@cnc-list.com <cnc-list@cnc-list.com> Cc: Morgan Ellis <mje.mjel...@gmail.com> Subject: Re: Stus-List 33-2 portlight material
Hi Dave, I used 6mm acrylic with a light bronze tint when I did mine this spring and it matched the original perfectly. It is my understanding that the UV and scratch resistant polycarbonate get those added properties from coatings applied to the surface and that these coatings don't last that long. Also I believe that Lewmar used acrylic on their hatches but it is much thicker, somewhere around 12mm. Morgan Ellis 30-2
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray