My 35-2 has a 14x28" panel installed by the previous owner, which makes for a good location for storing bumpers. I also plan on putting a stern anchor in the hatch, with a bucket to contain the rode.
-- Shawn Wright shawngwri...@gmail.com S/V Callisto, 1974 C&C 35 https://www.facebook.com/SVCallisto On Thu, Sep 12, 2019 at 12:49 PM Richard Bush via CnC-List < cnc-list@cnc-list.com> wrote: > Andy, great article; and its always fun when a C&C photo is included...I > would like to ask about the inspection panel on the transom just behind the > helm...did you install this? and if so, did it involve and structural > modifications? DId you sinply cut out the fiberglass and replace it with > the panel? Any other info appreciated also... > Thanks again > > Richard > s/v Bushmark4: 1985 C&C 37 CB: Ohio River, Mile 584.4 > > > Richard N. Bush Law Offices > 2950 Breckenridge Lane, Suite Nine > Louisville, Kentucky 40220-1462 > 502-584-7255 > > > -----Original Message----- > From: Andrew Burton via CnC-List <cnc-list@cnc-list.com> > To: cnc-list <cnc-list@cnc-list.com> > Cc: Andrew Burton <a.burton.sai...@gmail.com> > Sent: Thu, Sep 12, 2019 3:18 pm > Subject: Re: Stus-List Great article by Andy Burton > > Thanks, Joel, glad you liked it. > > Andrew Burton > 139 Tuckerman Ave > Middletown, RI > USA 02842 > > www.burtonsailing.com > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray