A shop vac might come in handy also. Any oil/water collected can be poured through an oil absorbent pad.
Dennis C. On Thu, Jan 2, 2020 at 10:30 AM Gary Nylander via CnC-List < cnc-list@cnc-list.com> wrote: > A roll of paper towels and a bottle of Simple Green should to the trick > unless you have a pool of oil, then two rolls will be better. Just did some > of that stuff. > > Gary > > 30-1 > > > > *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Bev > Parslow via CnC-List > *Sent:* Thursday, January 2, 2020 10:54 AM > *To:* cnc-list@cnc-list.com > *Cc:* Bev Parslow <bparslo...@yahoo.ca> > *Subject:* Stus-List cleaning the bilge > > > > Need to clean out an oily bilge. Can I use a normal degreaser, or will > that mess up the bilge pump? Any thoughts? > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray