I had the same problem with my 34/36. Garhauer made me a beautiful set of bow chocks. I cut off the toe rail near the bow, and the bolts they put on the bottom of the chocks were matched to the existing holes. The only thing I recommend to make the job easy is to account for the angles inside. I had a hard time getting the nuts on the bolts and threaded down because the bolts on the chocks were angled straight down. With the hull coming up at an angle in that area, they needed to be arranged so they could be accessed without the hull interfering. I don’t remember exactly the problem, but could take photos if it would help. Dave
S/V Aries 1990 C&C 34+ New London, CT > On May 31, 2020, at 7:13 PM, Rob Hamlin via CnC-List <cnc-list@cnc-list.com> > wrote: > > Hi > I’m new owner of Sapphire (formally Kaylarah capt. Gary, and it’s a great > boat) Does anyone have experience replacing the bow chocks on a 37/40, the > current setup does not allow for easy on / off of mooring ride. > > Thanks > Rob > > Sent from my iPhone > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray