I have an extra RAM mic setup, the VH-310. If that would work for you.
It looks like this:
https://www.locuradigital.com/images_upload/915244de24ba75cec9235406b.jpg
The socket is the same as the other modern RAM microphones.
It as the long cable, the cockpit female socket, and the handset. $20
for Stu and it's yours :)
Joe
Coquina
On 6/25/2020 8:20 AM, Hoyt, Mike via CnC-List wrote:
Hoping to draw from the practical knowledge of this list.
Last evening when plugging in RAM mic for first time this season we
found that one of the pins on the male receptacle had broken off and
is now stuck in side the female end that is on the RAM mic itself.
The RAM mic works perfectly (or did before this) and all that needs to
be replaced is the male socket that is attached to the hull.
The question is “How do I get the broken pin out of the female socket?”
I feel the male socket will be quite affordable and the RAM mic would
be quite expensive. I would rather not have to replace the RAM mic itself
Thanks
Mike Hoyt
Persistence
Halifax, NS
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray