Get a second person to help. While they are attempting to start, you can be down below giving the starter a love tap with a heavy implement. If it starts then you probably need to rebuild the starter.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Fri, Jul 3, 2020, 14:22 General Gao via CnC-List <cnc-list@cnc-list.com> wrote: > Hi everyone, > > I usually have to turn the key a few times for the starter to actually > rotate. I can hear the solenoid clicking even when the starter does not > turn. > > Would this indicate it is just a wire or connector issue? Or a starter > issue? Or if further investigation needed, what should be looked at? > > Just want to see if I can get advice from the much more experienced > community. > > thank you, > > Bo > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
