I have a weird issue. 2x last year a ran out of diesel and needed only 25 gallons to fill my 40 gallon tank. And, yes, I made sure it was topped off. I pulled the pickup tube to see if that was the issue, but it was solid straight and clean. In fact, I never see any crud or water in my Rancor. I want to just pump out the fuel to get a decent measurement of exactly how much fuel is in the tank.
So, I’m thinking, get a fuel polisher. Waddaya all think? Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 > On Jul 19, 2020, at 5:14 PM, cnc-list-requ...@cnc-list.com wrote: > > Send CnC-List mailing list submissions to > cnc-list@cnc-list.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > or, via email, send a message with subject or body 'help' to > cnc-list-requ...@cnc-list.com > > You can reach the person managing the list at > cnc-list-ow...@cnc-list.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CnC-List digest..." > > > Today's Topics: > > 1. Re: Salvage C&c 37+ (Ken Heaton) > 2. Re: Parting an ?89 30? CNC (Allan Rheaume) > 3. Re: C&C 32 Mk 1 pre-bend (Ray Kennedy) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 19 Jul 2020 16:42:56 -0300 > From: Ken Heaton <kenhea...@gmail.com> > To: cnc-list <cnc-list@cnc-list.com> > Subject: Re: Stus-List Salvage C&c 37+ > Message-ID: > <CAAbfP6SZ_Y5tMr-2RYLa2EX2vGw=cafsucb467xtouniuqz...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > If it was Ocean Phoenix, then that was a 37R they were trying to sell (or > had just recently sold). Dark blue hull like this? > > https://svoceanphoenix.files.wordpress.com/2018/05/cc-37r-3.jpg > > https://svoceanphoenix.com/2019/12/24/could-it-be-true-ocean-phoenix-is-for-sale/ > > > Ken H. > >> On Sun, 19 Jul 2020 at 11:53, PETER OCAMPO via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> I think it was Phoenix. Home port Portland >> >> >> >> >> >> >> >> Sent from my iPhone >> >> On Jul 19, 2020, at 10:43 AM, Ken Heaton via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> ?Hello Peter, >> >> Did you happen to notice a name on this 37+? I sort of keep up a list of >> the 37+ out there and would like to mark this one as gone. >> >> Ken Heaton >> >>> On Sunday, 19 July 2020, PETER OCAMPO via CnC-List <cnc-list@cnc-list.com> >>> wrote: >>> Hello all >>> >>> Capt Jim's Marine Salvage and Nautical Antiquities open every Saturday >> 9:00 am till 3:00 pm. >>> Call capt Jim 207-838-9902 >>> 326 Presumpscot St Portland ME >>> Open every Saturday 9:00 am till 3:00 pm or by appointment. >>> New England's largest Marine salvage superstore! >>> There was a 37+ >>> They are parting out due to running aground >>> Aft starboard quarter just at water line large hole saw the complete >> steering quadrant seems much tighter access them my 40 ; >>> Keel missing >>> Did not see the mast >>> stantions bow and stern rails looked good >>> Did not go inside >>> Hope this helps someone on the list if they need parts >>> Peter ocampo >>> 1983 40 aft cabin >>> Goonie Island >>> Portland. Maine >>> Sent from my iPhone _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200719/98d2206e/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Sun, 19 Jul 2020 21:02:59 +0000 (UTC) > From: Allan Rheaume <drumroll30m...@yahoo.ca> > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > Subject: Re: Stus-List Parting an ?89 30? CNC > Message-ID: <2065465962.4016385.1595192579...@mail.yahoo.com> > Content-Type: text/plain; charset="utf-8" > > Is there a website with details about this boat? How to go about purchasing > parts, etc? > Thanks,Al Rheaume30-2 Drumroll > On Friday, July 17, 2020, 04:32:07 p.m. EDT, JP Mail via CnC-List > <cnc-list@cnc-list.com> wrote: > > I?m standing in the salvage yard. > All kinds of everything for > ZCC30148B989 > King Salvage. > I live 10 Minutes away. > Motor is not seized. 3 GM? i think. > Jon > jon.peterpr...@gmail.com > > Sent from my iPhone > _______________________________________________ > > Thanks everyone for supporting this list with your contributions.? Each and > every one is greatly appreciated.? If you want to support the list - use > PayPal to send contribution --? https://www.paypal.me/stumurray > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200719/769a3586/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Sun, 19 Jul 2020 21:13:21 -0300 > From: "Ray Kennedy" <raymo...@bellaliant.net> > To: "'Francois Rivard'" <jeanfrancoisriv...@gmail.com>, "'cnc-list'" > <cnc-list@cnc-list.com> > Subject: Re: Stus-List C&C 32 Mk 1 pre-bend > Message-ID: <003a01d65e2a$9408a440$bc19ecc0$@net> > Content-Type: text/plain; charset="utf-8" > > Thanks Francois > > > > You diagrams are very helpful. Will also look at the links you included > > > > RayK > > Genesis > > Bedford NS > > > > From: Francois Rivard [mailto:jeanfrancoisriv...@gmail.com] > Sent: July 19, 2020 4:45 PM > To: cnc-list > Cc: raymo...@bellaliant.net > Subject: Stus-List C&C 32 Mk 1 pre-bend > > > > Hi Ray, > > > > You don't need a baby stay or messing with blocks to set your pre-bend. > > > > I do neither and I have me pre-bend set "by the book" > > > > You need to set your forestay length to get the appropriate amount of rake > for your boat then just tighten your base backstay tension to get the > pre-bend you need. > > > > To measure the pre-bend you run your main halyard down to your gooseneck, > tighten it and look at the distance between the halyard and the mast half-way > up the mast. Mine is set for 3 inches on our 34+. > > > > See my illustrations on the concepts and follow those links for more info on > how that's done from the C&C photo album site. > > > > http://www.cncphotoalbum.com/doityourself/masttuning/tuning.htm > > http://www.cncphotoalbum.com/doityourself/ > > Rake.jpg > > Prebend.jpg > > > > Good luck with the project. > > > > Jean-Francois Rivard > > 34+ "Take Five" > > Lake Lanier, GA > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200719/dcbca31a/attachment.html> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image002.jpg > Type: image/jpeg > Size: 12400 bytes > Desc: not available > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200719/dcbca31a/attachment.jpg> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: image004.jpg > Type: image/jpeg > Size: 14529 bytes > Desc: not available > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200719/dcbca31a/attachment-0001.jpg> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > CnC-List mailing list > CnC-List@cnc-list.com > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > ------------------------------ > > End of CnC-List Digest, Vol 174, Issue 96 > *****************************************
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray