We followed Dennis’ suggestion of the lamp wick, works great. Paul ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. via CnC-List <cnc-list@cnc-list.com> Sent: Saturday, August 15, 2020 12:27:43 PM To: CnClist <cnc-list@cnc-list.com> Cc: Dennis C. <capt...@gmail.com> Subject: Re: Stus-List Water Collecting Along Toe Rail
This has been discussed numerous times. Most of us just put a piece of cotton line or a sponge through a hole in the toe rail to wick the water over the side. I use lantern wick. It is not recommended to drill deck or toe rail to drain the water. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Sat, Aug 15, 2020 at 11:20 AM Cam Lubbock via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hello All, I’m guessing I’m not the first one to have this issue, but I haven’t seen it posted since being a list member. My C&C 38 mkII has the usual toe rail with the holes all along it. The holes are about a 1/2” above deck level so only large amounts of water drains from them. There are scuppers next to the cockpit but they are a few inches inboard from the rail, and with the sloping decks, they also only drain water when it gets high. There seems to always be a bit of water sitting along the rail at the low point, and it makes a bit of a mess of the deck when I’m away from the boat and not able to sponge it up. Does anyone have a simple solution besides tearing the deck apart to lower/move the scupper or drilling through the toe rail which would weaken it? Or should I just let evaporation do it’s thing and scrub the deck there whenever I can? Thanks, Cam 1976 C&C 38 MkII Checkmake Parry Sound, ON, Canada
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray