https://www.harborfreight.com/impact-screwdriver-set-with-case-37530.html
On Thu, Jan 14, 2021 at 5:41 AM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > Impact driver. > > Graham Collins > Secret Plans > C&C 35-III #11 > > On 2021-01-14 7:29 a.m., Adam Hayden via CnC-List wrote: > > > Hello > > I am in the process of ordering new spreaders and the supplier asked to > send the old bases so the holes can be properly aligned. > > The spreader bases are attached by screws. I have soaked with penetrating > oil this evening and will soak over night. I will bring a torch over > tomorrow. Any other suggestions would be appreciated. I would prefer not > to have to drill them out. > > See the attached link > > https://photos.app.goo.gl/RuDjmDNgWMELrcoR6 > > Thanks > Adam > C&C 36 > Pictou NS > > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
