Hi Adam
Current wisdom seems to be that one can put up to 4 lugs on a screw,
although difficult to fit. So options are:
- put up to 4 on each screw of the terminal strip (messy but gets you 8
connections)
- stay with a terminal strip, but use several locations on it and
connect them with terminal block jumpers (see link
<https://www.bluesea.com/products/9216/Terminal_Block_Jumper_for_65A_Terminal_Blocks>)
- buss bar - takes up a lot of space
Graham Collins
Secret Plans
C&C 35-III #11
On 2021-02-15 4:23 p.m., Adam Hayden via CnC-List wrote:
Hello folks.
As one of my many winter projects I have decided to rewire the 12
volt panel and add pigtails to make it easier to remove the panels by
creating a hinged panel. I plan to run the pig tails to a terminal
block. My question is how to distribute the positive leads from the
leads to the various interior lighting wires. I have about 4-6
different wires from different areas of the boat. Would you suggest
a terminal block with jumpers or a bus bar?
Any other suggestions would be appreciated.
Adam
C&C 36
Sent from my Bell Samsung device over Canada’s largest network.
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
