Adam, You can do it either way. Using a buss bar, a terminal strip (which will require jumpers between circuits), or you could use a fuse block. The later will protect each individual circuit. https://www.amazon.com/Blue-Sea-Systems-Blade-6-Circuit/dp/B000MMC7Q6/ref=asc_df_B000MMC7Q6/?tag=bingshoppinga-20&linkCode=df0&hvadid=&hvpos=&hvnetw=o&hvrand=&hvpone=&hvptwo=&hvqmt=e&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=&hvtargid=pla-4584070138300722&psc=1
I rewired my boat last winter, and in doing so replaced any wire that I messed with. I used a combination of terminal blocks, buss bars and fuse blocks. Enjoy Doug On Mon, Feb 15, 2021, 15:24 Adam Hayden via CnC-List <[email protected]> wrote: > Hello folks. > > As one of my many winter projects I have decided to rewire the 12 volt > panel and add pigtails to make it easier to remove the panels by creating a > hinged panel. I plan to run the pig tails to a terminal block. My question > is how to distribute the positive leads from the leads to the various > interior lighting wires. I have about 4-6 different wires from different > areas of the boat. Would you suggest a terminal block with jumpers or a > bus bar? > > Any other suggestions would be appreciated. > > Adam > C&C 36 > > Sent from my Bell Samsung device over Canada’s largest network. > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
