I have 85 MK3 used these people for gelcoatthey know all C&C colors, my deck 
was smoke gray was not cheap but perfect match.
MINI-CRAFT OF FL INC.900 INDUSTRIAL DRWILDWOOD FL 34785 
352/748-5200352/748-5338 FAX 
-----Original Message-----
From: Doug Mountjoy via CnC-List <cnc-list@cnc-list.com>
To: Stus-List <cnc-list@cnc-list.com>
Cc: Doug Mountjoy <svrebeccal...@gmail.com>
Sent: Sun, May 23, 2021 6:10 pm
Subject: Stus-List Re: Gelcoat colour matching

Thats what I was told by Fiberlay the local fiberglass supplier, and the 
"expert" I talked to prior to buying supplies to build my holding tank. But 
then he told me I needed 5 gallons of polyester resin, I used 1. 


Sent from my T-Mobile 4G LTE Device
Doug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39 

-------- Original message --------From: dwight veinot via CnC-List 
<cnc-list@cnc-list.com> Date: 5/23/21 12:33 PM (GMT-08:00) To: Stus-List 
<cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: 
Stus-List Re: Gelcoat colour matching 
Are you totally sure about that
On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List 
<cnc-list@cnc-list.com> wrote:

Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy 
will adhere to polyester and or vinyl ester based fiberglass. Gel coat will 
also work with vinyl ester based fiberglass. 

Doug

On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
<cnc-list@cnc-list.com> wrote:

  Hi Adam Burnside Fiberglass loaned me the color cards to compare to my 
gelcoat, for best results you might want to ask them if they still do that.  I 
can tell you what my can of gelcoat is marked (or you could try some if you 
want, it isn't like I'll use it all...).  I'm at AYC, where are you located?
  Graham Collins
Secret Plans
C&C 35-III #11 On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:
  
  Hello  
   I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)  Our decks are that slightly off-white light beige 
colour.  
   I am in Nova Scotia so may try Burnside Fibreglass.  
   Thanks  
   Adam  C&C 36  State of Bliss  
  Sent from my Bell Samsung device over Canada’s largest network. 
  Thanks to all of the subscribers that contributed to the list to help with 
the costs involved.  If you want to show your support to the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu 
 Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu


-- 
Douglas Mountjoy
253-208-1412
Port Orchard YC, WA
Rebecca Leah
C&C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
-- 
Sent from Gmail MobileThanks to all of the subscribers that contributed to the 
list to help with the costs involved.  If you want to show your support to the 
list - use PayPal to send contribution --  https://www.paypal.me/stumurray  
Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to