Hi Rod
Our 34 uses the same construction. The tangs are to hold the deck and bulkhead together. Mine were leaking a bit some 20 years ago so pulled them, rebedded with butyl so there was flex. No leaks since John and Maryann Legacy III 1982 C&C 34 Noank, CT From: Rod Fisk via CnC-List [mailto:[email protected]] Sent: Wednesday, June 09, 2021 7:25 AM To: [email protected] Cc: Rod Fisk Subject: Stus-List Deck hold -down? Image removed by sender. Image removed by sender. Image removed by sender. Image removed by sender. I have a C&C 36-1. There are stainless strap assemblies bolted through the main bulkhead port and starboard. These are welded to stainless pads bolted through the deck. I have removed the mounting bolts and the holes in the bulkhead are not elongated yet there is a gap of about 5/16" under the plate on the deck above. What is this for? I am guessing a deck hold--down, yet the deck appears to be firmly in contact with the bulkhead below. Has anyone else seen this? What have you done about it? Thanks Rod Fisk C&C 36 Corsair Oshkosh, WI
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
