Hello all! I have a %post script that has been running flawlessly through numerous cobbler / koan upgrades. Recently, I have noticed that DNS resolution is failing in 1.6.3 / 4 during %post wget as well as yum updates.
Now, I am not sure if this is a cobbler / anaconda or ? issue. I am able to hop over to virt con 2 (during koan install) and do a nslookup on the servers in question without issue, also resolve.conf looks fine. post-install.log shows: installing torque.repo --2009-04-22 14:39:40-- http://FQDN/setup/torque.repo Resolving FQDN... failed: Name or service not known. wget: unable to resolve host address `FQDN Removing any repo.rpmnew files Setting up snmpd --2009-04-22 14:39:40-- http://FQDN/setup/snmpd.cnf Resolving FQDN... failed: Name or service not known. wget: unable to resolve host address `FQDN' Setting up syslog via stunnel to timber --2009-04-22 14:39:40-- http://FQDN/setup/syslog.cnf Resolving FQDN... failed: Name or service not known. wget: unable to resolve host address `FQDN' ..... [r...@~]# rpm -qa koan koan-1.6.3-1.fc9.noarch [r...@~]# rpm -qa cobbler cobbler-1.6.4-1.fc9.i386 here is a excerpt from the %post section of the ks as well as the script being ran: %post ( echo "Post-Install section begins.." sleep 15 $SNIPPET('post_install_network_config') $SNIPPET('post_install_kernel_options') $SNIPPET('server_check.sh') $SNIPPET('post_anamon') echo "Post-Install section ends.." ) 2>&1 | tee /root/post-install.log echo "Setting up snmpd" wget -O /etc/snmp/snmpd.conf http://FQDN/setup/snmpd.cnf chkconfig snmpd on echo "Setting up syslog via stunnel to timber" wget -O /etc/stunnel/syslog.conf http://FQDN/setup/syslog.cnf wget -O /etc/init.d/syslog-stunnel http://FQDN/setup/syslog-stunnel chmod 755 /etc/init.d/syslog-stunnel chkconfig syslog-stunnel on #enable network echo "Enabling standard network service" chkconfig network on echo "Updating /etc/updatedb" wget -O /tmp/updatedb_conf.pl http://FQDN/setup/updatedb_conf.pl chmod 755 /tmp/updatedb_conf.pl /tmp/updatedb_conf.pl again, from virt con 2 during install a nslookup of FQDN resolves without issue. any thoughts? -Ron _______________________________________________ cobbler mailing list [email protected] https://fedorahosted.org/mailman/listinfo/cobbler
