On Wed, May 13, 2009 at 9:21 AM, Ronald J. Yacketta <[email protected]> wrote: > Hello all! > > I have a %post script that has been running flawlessly through numerous > cobbler / koan upgrades. Recently, I have noticed that DNS resolution is > failing in 1.6.3 / 4 during %post wget as well as yum updates. > > Now, I am not sure if this is a cobbler / anaconda or ? issue. > > I am able to hop over to virt con 2 (during koan install) and do a > nslookup on the servers in question without issue, also resolve.conf > looks fine. > > post-install.log shows: > installing torque.repo > --2009-04-22 14:39:40-- http://FQDN/setup/torque.repo > Resolving FQDN... failed: Name or service not known. > wget: unable to resolve host address `FQDN > Removing any repo.rpmnew files > Setting up snmpd > --2009-04-22 14:39:40-- http://FQDN/setup/snmpd.cnf > Resolving FQDN... failed: Name or service not known. > wget: unable to resolve host address `FQDN' > Setting up syslog via stunnel to timber > --2009-04-22 14:39:40-- http://FQDN/setup/syslog.cnf > Resolving FQDN... failed: Name or service not known. > wget: unable to resolve host address `FQDN' > > ..... > > [r...@~]# rpm -qa koan > koan-1.6.3-1.fc9.noarch > [r...@~]# rpm -qa cobbler > cobbler-1.6.4-1.fc9.i386 > > here is a excerpt from the %post section of the ks as well as the script > being ran: > > %post > ( > echo "Post-Install section begins.." > sleep 15 > > $SNIPPET('post_install_network_config') > > $SNIPPET('post_install_kernel_options') > > $SNIPPET('server_check.sh') > > $SNIPPET('post_anamon') > > echo "Post-Install section ends.." > ) 2>&1 | tee /root/post-install.log > > > echo "Setting up snmpd" > wget -O /etc/snmp/snmpd.conf http://FQDN/setup/snmpd.cnf > chkconfig snmpd on > > echo "Setting up syslog via stunnel to timber" > wget -O /etc/stunnel/syslog.conf http://FQDN/setup/syslog.cnf > wget -O /etc/init.d/syslog-stunnel http://FQDN/setup/syslog-stunnel > > chmod 755 /etc/init.d/syslog-stunnel > > chkconfig syslog-stunnel on > > #enable network > echo "Enabling standard network service" > chkconfig network on > > echo "Updating /etc/updatedb" > wget -O /tmp/updatedb_conf.pl http://FQDN/setup/updatedb_conf.pl > chmod 755 /tmp/updatedb_conf.pl > /tmp/updatedb_conf.pl > > > again, from virt con 2 during install a nslookup of FQDN resolves > without issue. > > any thoughts?
Can we get the output of cobbler system report --name FQDN? It could be the --name-servers-search is wrong. We put static subnet declarations in our cobbler dhcp.template include the dns servers we want used for each subnet. -- Jeff Schroeder Don't drink and derive, alcohol and analysis don't mix. http://www.digitalprognosis.com _______________________________________________ cobbler mailing list [email protected] https://fedorahosted.org/mailman/listinfo/cobbler
