pxelinux.0 does seem to be the culprit. If I force the DHCP to fail during PXE boot, the BIOS falls thru to the local disk and all is good.
So where can I get a better pxelinux.0 ? JLM --- Jeremy Mordkoff RIFT.io 77 S Bedford St, Burlington, MA 01803 ________________________________________ From: [email protected] <[email protected]> on behalf of Daniele Gregori <[email protected]> Sent: Tuesday, April 14, 2015 6:17 PM To: cobbler mailing list Subject: Re: [cobbler] linux16/initrd16 and PXE A question, the second boot (after installation) becomes in hang if you disconnect the ethernet cable? In my setup I found that the cause was the pxelinux.0 file adopted by the dhcp server, I changed it with an old version one to solve. Daniele Il giorno 14/apr/2015, alle ore 23:00, Jeremy Mordkoff <[email protected]<mailto:[email protected]>> ha scritto: I know this is not strictly a cobbler question..... I use cobbler to install FC21. I end up with a grub file with init16 and linux16 in it. The system will boot if the BIOS is set to boot from the disk, but it hangs if I let it PXE boot and then chainload (is that the right word) to the local disk. Also, it will work with PXE if I change initrd16 to initrd and linux16 to linux Any suggestions? Right now I am simply munging the grub config file in my kickstart script. JLM --- Jeremy Mordkoff RIFT.io 77 S Bedford St, Burlington, MA 01803 _______________________________________________ cobbler mailing list [email protected]<mailto:[email protected]> https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler
