Hi David,
I do not understand your explaination. From my understanding, the diff text
matches the depot path. There is a hyperlinked parallel line. A window popped
up after I clicked on the Paraelle. It shows two differen revisons of the file.
I tried it again. Still, there is no hyperlink with the line number. Below is
the detail.
in codestriker.conf:
'perforce:apache:apache1...@ipcswsvdcp4:1666',
The Perforce client workspace spec:
p4 client -o
View:
//training/... //gary_pc_training/training/...
p4 diff -du
==== //training/main.c#10 - c:\workspace\gary_pc_training\training\main.c ====
@@ -30,7 +30,6 @@
#include <sys\ppc440sp_board.h>
#include <ppclib.h>
-#include <asynclib.h>
#include <stdio.h>
#include <sys\tcpiplib.h>
#include <serial.h>
@@ -41,12 +40,13 @@
/* SDRAM MICRON */
#define SDRAM_MICRON 0x2C
-#define SDRAM_TRUE 1
+#define SDRAM_TRUE 2
#define SDRyAM_FALSE 0
#define SDRAM_DDR1 1
#define SDRAM_DDR2 2
#define SDRAM_NONE 0
#define MAXDIMMS 2
+#define max 3
#define MAXRANKS 2 /* Changes le 12/01/05 pour 1.6*/
#define MAXBANKSPERDIMM 8
#define MAXRANKSPERDIMM 2
==== //training/test_dir/mainTG.c#1 -
c:\workspace\gary_pc_training\training\test_dir\mainTG.c ====
@@ -20,8 +20,7 @@
#---------------------------------------------------------------------------*/
/* Perform DQS calibration and test memory */
-#include <sys\ppc440sp_board.h>
-#include <ppclib.h>
+#include <ppc.h>
#include <asynclib.h>
#include <stdio.h>
#include <sys\tcpiplib.h>
@@ -34,6 +33,7 @@
#define SDRAM_MICRON 0x2C
#define SDRAM_TRUE 1
+#define SDRAM_TRUE 9
#define SDRyAM_FALSE 0
#define SDRAM_DDR1 1
#define SDRAM_DDR2 2
Thanks,
Gary
--- On Wed, 5/6/09, David Sitsky <david.sit...@gmail.com> wrote:
> From: David Sitsky <david.sit...@gmail.com>
> Subject: Re: No new browser window opened up after clicked on the line number.
> To: "Gary Yang" <garyya...@yahoo.com>
> Cc: codestriker-user@lists.sourceforge.net
> Date: Wednesday, May 6, 2009, 3:14 PM
> This happens when the diff you have
> loaded in doesn't match the
> repository associated with the topic. If you have the
> repository set
> to your Perforce depot, and the diff text matches the depot
> path, then
> those links will become active again. You'll need to
> create new
> topics whenever you change the repository string in
> codestriker.conf.
>
> Cheers,
> David
>
> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <garyya...@yahoo.com>
> wrote:
> >
> > Hi David,
> >
> >
> > I use Perforce and Codestriker 1.9.6. In the The
> Codestriker Guide 1.9.5 at the section, 3.5.1. Viewing a
> Topic. The last paragraph says below:
> >
> > Each file is broken up into a series of "deltas". At
> the head of each delta block, for both the old and new
> versions of the file, there is an indication of what line
> number the delta started at. In this situation, clicking on
> the "Line 24" link on the left hand side, will open a new
> browser window, which will contain the complete original
> contents of codestriker/codestriker.pl, anchored at line 24.
> Clicking on the "Line 22" link on the right hand side will
> contain the complete contents of codestriker/codestriker.pl
> will all of the proposed changes applied.
> >
> > However, when I clicked on the line number, there is
> no new browser window opened up. Actually, there is no
> hyperlink line under the line number. It is different than
> what I see in the manual. Can you please let me know the
> reason?
> >
> >
> > Thanks,
> >
> >
> > Gary
> >
> >
> >
> >
> >
>
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Codestriker-user mailing list
Codestriker-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/codestriker-user
