Ah now I am with you. Yes that link no longer exists since a major refactoring of the view code a few subversions ago. Most people just clicked on "Parallel", then horizontally scrolled the browser window if they wanted to see the old file, or the new file.
Because of limited available time I have, the manual has a number of old screenshots in it. Cheers, David On Fri, May 8, 2009 at 4:28 AM, Gary Yang <garyya...@yahoo.com> wrote: > > David, > > I am not talking about the line numbers used to add comments. It works fine. > I am talking about the Line number next to the "Parallel". > > At the Codestriker Guide, 3.5.3 Viewing Complete old/new Files. It syas: > > As mention in Section 3.5.1, it is possible to view the entire contents of a > file in a review in its original form, or in its proposed form, or > side-by-side depending on whether the "Line" or "Parallel" link was selected. > ...... > When a "Line" link is clicked, a new browser window will come up with the > contents of the file. > > > I am able to click on the Parallel. It pops up a new browser to show me both > original and changed revision. However, the Line number next to the Parallel > there is no hyperlink with it. Nothing poped up after I clicked on it. Can > you please tell me how to fix it? > > Thanks. > > > > --- On Wed, 5/6/09, David Sitsky <david.sit...@gmail.com> wrote: > >> From: David Sitsky <david.sit...@gmail.com> >> Subject: Re: No new browser window opened up after clicked on the line >> number. >> To: "Gary Yang" <garyya...@yahoo.com> >> Cc: codestriker-user@lists.sourceforge.net >> Date: Wednesday, May 6, 2009, 5:45 PM >> The more recent versions of >> Codestriker removed the explicit >> underlines form the line numbers. If you click on >> them, a little >> inline popup window should appear, allowing you to enter a >> comment. >> >> If this is not happening, make sure you are at least using >> 1.9.8. >> Also try it with firefox, to make sure its not a browser >> issue. >> >> On Thu, May 7, 2009 at 10:00 AM, Gary Yang <garyya...@yahoo.com> >> wrote: >> > >> > >> > Hi David, >> > >> > I do not understand your explaination. From my >> understanding, the diff text matches the depot path. There >> is a hyperlinked parallel line. A window popped up after I >> clicked on the Paraelle. It shows two differen revisons of >> the file. I tried it again. Still, there is no hyperlink >> with the line number. Below is the detail. >> > >> > >> > in codestriker.conf: >> > >> > 'perforce:apache:apache1...@ipcswsvdcp4:1666', >> > >> > The Perforce client workspace spec: >> > p4 client -o >> > View: >> > //training/... >> //gary_pc_training/training/... >> > >> > >> > p4 diff -du >> > ==== //training/main.c#10 - >> c:\workspace\gary_pc_training\training\main.c ==== >> > @@ -30,7 +30,6 @@ >> > >> > #include <sys\ppc440sp_board.h> >> > #include <ppclib.h> >> > -#include <asynclib.h> >> > #include <stdio.h> >> > #include <sys\tcpiplib.h> >> > #include <serial.h> >> > @@ -41,12 +40,13 @@ >> > /* SDRAM MICRON */ >> > #define SDRAM_MICRON 0x2C >> > >> > -#define SDRAM_TRUE 1 >> > +#define SDRAM_TRUE 2 >> > #define SDRyAM_FALSE 0 >> > #define SDRAM_DDR1 1 >> > #define SDRAM_DDR2 2 >> > #define SDRAM_NONE 0 >> > #define MAXDIMMS 2 >> > +#define max 3 >> > #define MAXRANKS 2 /* Changes le 12/01/05 pour >> 1.6*/ >> > #define MAXBANKSPERDIMM 8 >> > #define MAXRANKSPERDIMM 2 >> > ==== //training/test_dir/mainTG.c#1 - >> c:\workspace\gary_pc_training\training\test_dir\mainTG.c >> ==== >> > @@ -20,8 +20,7 @@ >> > >> #---------------------------------------------------------------------------*/ >> > /* Perform DQS calibration and test memory */ >> > >> > -#include <sys\ppc440sp_board.h> >> > -#include <ppclib.h> >> > +#include <ppc.h> >> > #include <asynclib.h> >> > #include <stdio.h> >> > #include <sys\tcpiplib.h> >> > @@ -34,6 +33,7 @@ >> > #define SDRAM_MICRON 0x2C >> > >> > #define SDRAM_TRUE 1 >> > +#define SDRAM_TRUE 9 >> > #define SDRyAM_FALSE 0 >> > #define SDRAM_DDR1 1 >> > #define SDRAM_DDR2 2 >> > >> > >> > Thanks, >> > >> > >> > Gary >> > >> > --- On Wed, 5/6/09, David Sitsky <david.sit...@gmail.com> >> wrote: >> > >> >> From: David Sitsky <david.sit...@gmail.com> >> >> Subject: Re: No new browser window opened up after >> clicked on the line number. >> >> To: "Gary Yang" <garyya...@yahoo.com> >> >> Cc: codestriker-user@lists.sourceforge.net >> >> Date: Wednesday, May 6, 2009, 3:14 PM >> >> This happens when the diff you have >> >> loaded in doesn't match the >> >> repository associated with the topic. If you >> have the >> >> repository set >> >> to your Perforce depot, and the diff text matches >> the depot >> >> path, then >> >> those links will become active again. You'll >> need to >> >> create new >> >> topics whenever you change the repository string >> in >> >> codestriker.conf. >> >> >> >> Cheers, >> >> David >> >> >> >> On Thu, May 7, 2009 at 7:56 AM, Gary Yang <garyya...@yahoo.com> >> >> wrote: >> >> > >> >> > Hi David, >> >> > >> >> > >> >> > I use Perforce and Codestriker 1.9.6. In the >> The >> >> Codestriker Guide 1.9.5 at the section, 3.5.1. >> Viewing a >> >> Topic. The last paragraph says below: >> >> > >> >> > Each file is broken up into a series of >> "deltas". At >> >> the head of each delta block, for both the old and >> new >> >> versions of the file, there is an indication of >> what line >> >> number the delta started at. In this situation, >> clicking on >> >> the "Line 24" link on the left hand side, will >> open a new >> >> browser window, which will contain the complete >> original >> >> contents of codestriker/codestriker.pl, anchored >> at line 24. >> >> Clicking on the "Line 22" link on the right hand >> side will >> >> contain the complete contents of >> codestriker/codestriker.pl >> >> will all of the proposed changes applied. >> >> > >> >> > However, when I clicked on the line number, >> there is >> >> no new browser window opened up. Actually, there >> is no >> >> hyperlink line under the line number. It is >> different than >> >> what I see in the manual. Can you please let me >> know the >> >> reason? >> >> > >> >> > >> >> > Thanks, >> >> > >> >> > >> >> > Gary >> >> > >> >> > >> >> > >> >> > >> >> > >> >> >> > >> > >> > >> > >> > > > > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Codestriker-user mailing list Codestriker-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/codestriker-user
