This is an automated email from the ASF dual-hosted git repository. acassis pushed a commit to branch master in repository https://gitbox.apache.org/repos/asf/nuttx.git
commit 269cd9e251714b2bc40bccb07456cbbaed3bb7fe Author: raiden00pl <[email protected]> AuthorDate: Wed Nov 4 13:46:22 2026 +0100 boards/stm32h7s8-dk: Describe the X3 HSE oscillator. HSE comes from the X3 24 MHz oscillator on PH0 (bypass mode), not from the ST-LINK MCO. Assisted-by: Claude Code:claude-opus-5-5 Signed-off-by: raiden00pl <[email protected]> --- boards/arm/stm32h7/stm32h7s8-dk/include/board.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/boards/arm/stm32h7/stm32h7s8-dk/include/board.h b/boards/arm/stm32h7/stm32h7s8-dk/include/board.h index a126adacac1..ff328368398 100644 --- a/boards/arm/stm32h7/stm32h7s8-dk/include/board.h +++ b/boards/arm/stm32h7/stm32h7s8-dk/include/board.h @@ -43,12 +43,10 @@ /* The STM32H7S8-DK board provides the following clock sources: * - * MCO: 24 MHz from the ST-LINK is available as the HSE input + * X3: 24 MHz oscillator on OSC_IN (PH0), HSE bypass mode * X2: 32.768 kHz crystal for LSE * - * HSI is selected by default so that the board can run when the ST-LINK is - * not supplying its MCO clock. CONFIG_STM32H7S8_DK_USE_HSE selects the - * 24 MHz bypass clock instead. + * HSI is selected by default. CONFIG_STM32H7S8_DK_USE_HSE selects HSE. */ #define STM32_BOARD_XTAL 24000000ul
