sthetland commented on a change in pull request #11912:
URL: https://github.com/apache/druid/pull/11912#discussion_r747925328
##########
File path: docs/development/extensions-core/kafka-ingestion.md
##########
@@ -119,403 +127,142 @@ Where the file `supervisor-spec.json` contains a Kafka
supervisor spec:
}
```
-## Supervisor Configuration
-
-|Field|Description|Required|
-|--------|-----------|---------|
-|`type`|Supervisor type. For Kafka streaming, set to `kafka`.|yes|
-|`spec`| Container object for the supervisor configuration. | yes |
-|`dataSchema`|Schema for the Kafka indexing task to use during ingestion.|yes|
-|`ioConfig`|A `KafkaSupervisorIOConfig` object to define the Kafka connection
and I/O-related settings for the supervisor and indexing task. See
[KafkaSupervisorIOConfig](#kafkasupervisorioconfig).|yes|
-|`tuningConfig`|A KafkaSupervisorTuningConfig object to define
performance-related settings for the supervisor and indexing tasks. See
[KafkaSupervisorTuningConfig](#kafkasupervisortuningconfig).|no|
-
-### KafkaSupervisorIOConfig
-
-|Field|Type|Description|Required|
-|-----|----|-----------|--------|
-|`topic`|String|The Kafka topic to read from. Must be a specific topic. Topic
patterns are not supported.|yes|
-|`inputFormat`|Object|`inputFormat` to define input data parsing. See
[Specifying data format](#specifying-data-format) for details about specifying
the input format.|yes|
-|`consumerProperties`|Map<String, Object>|A map of properties to pass to the
Kafka consumer. See [More on consumer
properties](#more-on-consumerproperties).|yes|
-|`pollTimeout`|Long|The length of time to wait for the Kafka consumer to poll
records, in milliseconds|no (default == 100)|
-|`replicas`|Integer|The number of replica sets. "1" means a single set of
tasks without replication. Druid always assigns replica tasks to different
workers to provide resiliency against worker failure.|no (default == 1)|
-|`taskCount`|Integer|The maximum number of *reading* tasks in a *replica set*.
The maximum number of reading tasks equals `taskCount * replicas`. Therefore,
the total number of tasks, *reading* + *publishing*, is greater than this
count. See [Capacity Planning](#capacity-planning) for more details. When
`taskCount > {numKafkaPartitions}`, the actual number of reading tasks is less
than the `taskCount` value.|no (default == 1)|
-|`taskDuration`|ISO8601 Period|The length of time before tasks stop reading
and begin publishing segments.|no (default == PT1H)|
-|`startDelay`|ISO8601 Period|The period to wait before the supervisor starts
managing tasks.|no (default == PT5S)|
-|`period`|ISO8601 Period|Frequency at which the supervisor executes its
management logic. The supervisor also runs in response to certain events. For
example task success, task failure, and tasks reaching their `taskDuration`.
The `period` value specifies the maximum time between iterations.|no (default
== PT30S)|
-|`useEarliestOffset`|Boolean|If a supervisor manages a dataSource for the
first time, it obtains a set of starting offsets from Kafka. This flag
determines whether it retrieves the earliest or latest offsets in Kafka. Under
normal circumstances, subsequent tasks will start from where the previous
segments ended. Therefore Druid only uses `useEarliestOffset` on first run.|no
(default == false)|
-|`completionTimeout`|ISO8601 Period|The length of time to wait before
declaring a publishing task as failed and terminating it. If the value is too
low, your tasks may never publish. The publishing clock for a task begins
roughly after `taskDuration` elapses.|no (default == PT30M)|
-|`lateMessageRejectionStartDateTime`|ISO8601 DateTime|Configure tasks to
reject messages with timestamps earlier than this date time; for example if
this is set to `2016-01-01T11:00Z` and the supervisor creates a task at
*2016-01-01T12:00Z*, Druid drops messages with timestamps earlier than
*2016-01-01T11:00Z*. This can prevent concurrency issues if your data stream
has late messages and you have multiple pipelines that need to operate on the
same segments (e.g. a realtime and a nightly batch ingestion pipeline).|no
(default == none)|
-|`lateMessageRejectionPeriod`|ISO8601 Period|Configure tasks to reject
messages with timestamps earlier than this period before the task was created;
for example if this is set to `PT1H` and the supervisor creates a task at
*2016-01-01T12:00Z*, messages with timestamps earlier than *2016-01-01T11:00Z*
will be dropped. This may help prevent concurrency issues if your data stream
has late messages and you have multiple pipelines that need to operate on the
same segments (e.g. a realtime and a nightly batch ingestion pipeline). Please
note that only one of `lateMessageRejectionPeriod` or
`lateMessageRejectionStartDateTime` can be specified.|no (default == none)|
-|`earlyMessageRejectionPeriod`|ISO8601 Period|Configure tasks to reject
messages with timestamps later than this period after the task reached its
taskDuration; for example if this is set to `PT1H`, the taskDuration is set to
`PT1H` and the supervisor creates a task at *2016-01-01T12:00Z*, messages with
timestamps later than *2016-01-01T14:00Z* will be dropped. **Note:** Tasks
sometimes run past their task duration, for example, in cases of supervisor
failover. Setting earlyMessageRejectionPeriod too low may cause messages to be
dropped unexpectedly whenever a task runs past its originally configured task
duration.|no (default == none)|
-|`autoScalerConfig`|Object|Defines auto scaling behavior for Kafka ingest
tasks. See [Tasks Autoscaler Properties](#task-autoscaler-properties).|no
(default == null)|
-
-#### Task Autoscaler Properties
-
-> Note that Task AutoScaler is currently designated as experimental.
-
-| Property | Description | Required |
-| ------------- | ------------- | ------------- |
-| `enableTaskAutoScaler` | Enable or disable autoscaling. `false` or blank
disables the `autoScaler` even when `autoScalerConfig` is not null| no (default
== false) |
-| `taskCountMax` | Maximum number of ingestion tasks. Set `taskCountMax >=
taskCountMin`. If `taskCountMax > {numKafkaPartitions}`, Druid only scales
reading tasks up to the `{numKafkaPartitions}`. In this case `taskCountMax` is
ignored. | yes |
-| `taskCountMin` | Minimum number of ingestion tasks. When you enable
autoscaler, Druid ignores the value of taskCount in `IOConfig` and starts with
the `taskCountMin` number of tasks.| yes |
-| `minTriggerScaleActionFrequencyMillis` | Minimum time interval between two
scale actions. | no (default == 600000) |
-| `autoScalerStrategy` | The algorithm of `autoScaler`. Only supports
`lagBased`. See [Lag Based AutoScaler Strategy Related
Properties](#lag-based-autoscaler-strategy-related-properties) for details.| no
(default == `lagBased`) |
-
-##### Lag Based AutoScaler Strategy Related Properties
-| Property | Description | Required |
-| ------------- | ------------- | ------------- |
-| `lagCollectionIntervalMillis` | Period of lag points collection. | no
(default == 30000) |
-| `lagCollectionRangeMillis` | The total time window of lag collection. Use
with `lagCollectionIntervalMillis`，it means that in the recent
`lagCollectionRangeMillis`, collect lag metric points every
`lagCollectionIntervalMillis`. | no (default == 600000) |
-| `scaleOutThreshold` | The threshold of scale out action | no (default ==
6000000) |
-| `triggerScaleOutFractionThreshold` | If `triggerScaleOutFractionThreshold`
percent of lag points are higher than `scaleOutThreshold`, then do scale out
action. | no (default == 0.3) |
-| `scaleInThreshold` | The Threshold of scale in action | no (default ==
1000000) |
-| `triggerScaleInFractionThreshold` | If `triggerScaleInFractionThreshold`
percent of lag points are lower than `scaleOutThreshold`, then do scale in
action. | no (default == 0.9) |
-| `scaleActionStartDelayMillis` | Number of milliseconds after supervisor
starts when first check scale logic. | no (default == 300000) |
-| `scaleActionPeriodMillis` | The frequency of checking whether to do scale
action in millis | no (default == 60000) |
-| `scaleInStep` | How many tasks to reduce at a time | no (default == 1) |
-| `scaleOutStep` | How many tasks to add at a time | no (default == 2) |
-
-The following example demonstrates supervisor spec with `lagBased` autoScaler
enabled:
-```json
+### Kafka input format supervisor spec example
+If you want to ingest data from other fields in addition to the Kafka message
contents, you can use the `kafka` input format. The `kafka` input format lets
you ingest:
+- the message key field.
+- message headers.
+- the Kafka message timestamp.
+
+> The Kafka inputFormat is currently designated as experimental.
+
+For example, consider the following structure for a message that represents an
fictitious wiki edit in a development environment:
+- **Event headers**: {"environment": "development"}
+- **Event key**: {"key: "wiki-edit"}
+- **Event value**: \<JSON object with message contents of the change details\>
+- **Event timestamp**: "Nov. 10, 2021 at 14:06"
+
+When you use the `kafka` input format, you configure the way that Druid names
the dimensions created from the Kafka message:
+- `headerLabelPrefix`: Supply a prefix to the Kafka headers to avoid any
conflicts with named dimensions. The default is `kafka.header.`. Considering
the header from the example, Druid maps the header to the following column:
`kafka.header.enviornment`.
Review comment:
This one still needs to be done I think.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
