kasjer commented on issue #2152: board config file for NRF52811 URL: https://github.com/apache/mynewt-core/issues/2152#issuecomment-573470950 This does not seems like mynewt issue. Anyway here are my thoughts. *boot-nrf52xxaa.ld* should have correct ram size ``` MEMORY { FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0xC000 RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x6000 } ``` *boot-nrf52xxaa.ld* has correct ram size but flash size should match slot 0 size ``` MEMORY { FLASH (rx) : ORIGIN = 0x0000C000, LENGTH = 0xD000 RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x6000 } ``` Bootloader in most cases fits in 32KB instead of 48KB. Blink led would better be pin 9 since pin 10 is also output from FTDI chip. *bsp.h* should have correct ram size ``` #define RAM_SIZE 0x6000 ```
---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: [email protected] With regards, Apache Git Services
