alvarop commented on issue #2152: board config file for NRF52811 URL: https://github.com/apache/mynewt-core/issues/2152#issuecomment-574341053 I’ve been using this bsp for one of my projects: https://github.com/alvarop/ostur/tree/master/fw/2.0/hw/bsp/ostur_sensor_v1p0 Alvaro On Mon, Jan 13, 2020 at 12:39 PM kasjer <[email protected]> wrote: > This does not seems like mynewt issue. > Anyway here are my thoughts. > > *boot-nrf52xxaa.ld* should have correct ram size > > MEMORY > { > FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0xC000 > RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x6000 > } > > *boot-nrf52xxaa.ld* has correct ram size but flash size should match slot > 0 size > > MEMORY > { > FLASH (rx) : ORIGIN = 0x0000C000, LENGTH = 0xD000 > RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x6000 > } > > Bootloader in most cases fits in 32KB instead of 48KB. > > Blink led would better be pin 9 since pin 10 is also output from FTDI chip. > > *bsp.h* should have correct ram size > > #define RAM_SIZE 0x6000 > > — > You are receiving this because you were mentioned. > Reply to this email directly, view it on GitHub > <https://github.com/apache/mynewt-core/issues/2152?email_source=notifications&email_token=AAFVVQOMZDCA3JRZ5UWJ3KTQ5OS2RA5CNFSM4KFAJAO2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEIXHRZQ#issuecomment-573470950>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AAFVVQO5XNRGDTEB7J64LX3Q5OS2RANCNFSM4KFAJAOQ> > . >
---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: [email protected] With regards, Apache Git Services
