mlyszczek commented on code in PR #15828: URL: https://github.com/apache/nuttx/pull/15828#discussion_r1954074924
########## drivers/wireless/lpwan/rn2xx3/rn2xx3.c: ########## @@ -0,0 +1,1508 @@ +/**************************************************************************** + * drivers/wireless/lpwan/rn2xx3/rn2xx3.c + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. The + * ASF licenses this file to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance with the + * License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the + * License for the specific language governing permissions and limitations + * under the License. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <assert.h> +#include <debug.h> +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <poll.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> +#include <unistd.h> + +#include <nuttx/fs/fs.h> +#include <nuttx/kmalloc.h> +#include <nuttx/mutex.h> +#include <nuttx/semaphore.h> +#include <nuttx/signal.h> +#include <nuttx/wqueue.h> + +#include <nuttx/wireless/lpwan/rn2xx3.h> + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Duration of maximum MAC layer pause in milliseconds */ + +#define MAC_PAUSE_DUR "4294967245" + +/* TODO: implement the following commands + * coding rate + * iqi + * crc + * sync word + * bitrate + */ + +/**************************************************************************** + * Private Data Types + ****************************************************************************/ + +/* Radio transceiver modules */ + +enum rn2xx3_type_e +{ + RN2903 = 0, /* RN2903 transceiver */ + RN2483 = 1, /* RN2483 transceiver */ +}; + +struct rn2xx3_dev_s +{ + FAR struct file uart; /* UART interface */ + bool receiving; /* Currently receiving */ + mutex_t devlock; /* Exclusive access */ + enum rn2xx3_type_e model; /* Transceiver model */ + enum rn2xx3_mod_e mod; /* Modulation mode */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +static ssize_t rn2xx3_write(FAR struct file *filep, FAR const char *buffer, + size_t buflen); +static ssize_t rn2xx3_read(FAR struct file *filep, FAR char *buffer, + size_t buflen); +static int rn2xx3_ioctl(FAR struct file *filep, int cmd, unsigned long arg); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static const struct file_operations g_rn2xx3fops = +{ + .open = NULL, + .close = NULL, + .read = rn2xx3_read, + .write = rn2xx3_write, + .ioctl = rn2xx3_ioctl, +}; + +/* Modulation types */ + +static const char *MODULATIONS[] = +{ + "lora", /* RN2XX3_MOD_LORA */ + "fsk", /* RN2XX3_MOD_FSK */ +}; + +/* Max packet sizes for each modulation type. */ + +static const uint8_t MAX_PKTSIZE[] = +{ + 255, /* RN2XX3_MOD_LORA */ + 64, /* RN2XX3_MOD_FSK */ +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: radio_flush + * + * Description: + * Flushes all characters in the receive buffer from the RN2xx3 radio. + * Returns the number of bytes read. + * + ****************************************************************************/ + +static int radio_flush(FAR struct rn2xx3_dev_s *priv) +{ + int err; + int to_read; + char buf[10]; + + err = file_ioctl(&priv->uart, FIONREAD, &to_read); + if (err < 0) + { + return err; + } + + while (to_read > 0) + { + err = file_read(&priv->uart, buf, sizeof(buf)); + if (err < 0) + { + return err; + } + + to_read -= err; + } + + return 0; +} + +/**************************************************************************** + * Name: read_line + * + * Description: + * Reads a whole line of response from the RN2xx3 radio. Returns the number + * of bytes read. + * + ****************************************************************************/ + +static ssize_t read_line(FAR struct rn2xx3_dev_s *priv, FAR char *buf, + size_t nbytes) +{ + ssize_t length = 0; + ssize_t i = 0; + + for (; i < nbytes; ) + { + length = file_read(&priv->uart, &buf[i], nbytes - i); + + if (length < 0) + { + return length; + } + + i += length; + + if (buf[i] == '\n' || (buf[i - 1] == '\n' && i > 0)) + { + break; + } + } + + return i + 1; /* Number of bytes read */ Review Comment: Why i+1 here? You don's seem to be writing extra bytes to `buf` -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: commits-unsubscr...@nuttx.apache.org For queries about this service, please contact Infrastructure at: us...@infra.apache.org
