erwango commented on code in PR #12756:
URL: https://github.com/apache/tvm/pull/12756#discussion_r969342711
##########
apps/microtvm/zephyr/template_project/app-overlay/nucleo_l4r5zi.overlay:
##########
@@ -21,3 +21,29 @@
&rcc {
clock-frequency = <DT_FREQ_M(120)>;
};
+
+/* Set PLL, where:
+
+ VCO freq = PLL clock input freq (HSI: 16 MHz) * N / M,
+ Core freq = VCO freq / R,
+ PLL48M1CLK freq = VCO freq / Q, and
+ PLLSAI3CLK freq = VCO freq / P,
+
+ Hence, since div-q = 2 => Q = 6 and div-p = 7 => P = 7:
+
+ VCO freq = 16 * 30 / 2 = 240 MHz
+
+ Core freq = 240 MHz / 2 = 120 MHz
+ PLL48M1CLK freq = 240 MHz / PLLQ = 40 MHz
+ PLLSAI3CLK freq = 240 MHz / PLLP = 34.28571 MHz
+*/
+
+&pll {
+ div-m = <2>;
+ mul-n = <30>;
+ div-p = <7>;
+ div-q = <2>;
Review Comment:
Note: To save power, you can just remove these if these PLL outputs are not
required.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
