Hi Ian, I have to admit I have not had time to out this on my SD card yet but I have booted it from the neo normally.
On 27/09/2007, ian douglas <[EMAIL PROTECTED]> wrote: > > So to recap what I've tried, that doesn't work to get Qtopia on my SD > card and boot from SD: > > I went to http://www.qtopia.net/modules/devices/openmoko.php and > downloaded the three files under "Qtopia for the Neo1973 Downloads", and > unpacked them onto a 2GB microSD card, formatted as ext3: > > # mount /dev/sdc1 /media/sdcard > # tar -C /media/sdcard -zxvf \ > /path/to/qtopia/ficgta01-qtopia-developer-rootfs.tgz > # tar -C /media/sdcard -zxvf \ > /path/to/qtopia/arm920t-eabi-ficgta01-toolchain.tgz > # tar -C /media/sdcard/boot/ -xzvf \ > /path/to/qtopia/qtopia-4.3.0-preview-neo-flash.tgz > > ... the last step of course placed the uImage file and the rootfs file > into the SD card's /boot/ folder (there's no documentation anywhere that > describes where else to place these, so I was guessing as I went) Looks like your problem is that you do not need the developer rootfs or the toolchain to boot into qtopia from the sd card. Inside /path/to/qtopia/qtopia-4.3.0-preview-neo-flash.tgz as you noted is the rootfs and the uImage. These are the only two you need. uImage in /boot/ and rootfs in / If I have time tonight I will confirm this for you. always too busy with work... -Pete
_______________________________________________ OpenMoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
