Hi List,

I've created a new page for this issue in Openmoko Wiki.  Welcome to
contribute your network status with all community.  BTW, we'd like to
just confirm your IMEI code whether it has one or all zero, so please
just write Yes or No in table. Thanks a lot! :)

http://wiki.openmoko.org/wiki/GSM_network_registration

Best Regards,
Erin

Wolfgang Spraul wrote:
> cool. Should we create a wiki page to collect the results?
> Wolfgang
> 
> On Mar 17, 2008, at 12:43 PM, Erin Yueh wrote:
> 
>> Hi List,
>>
>> We'd like to ask your kindly helps on network registration by using
>> your NEO devices. Particularly, the network from T-Mobile in UK, AT&T
>> in USA, and Vodafone in Germany, since we've heard some problems about
>> network registration. It's difficult to camp the network by using some
>> specific SIM cards. If you are willing to update your network status
>> with us, we really appreciate from your works. Thanks a lot! :)
>>
>> Our questions as below:
>>
>> 1. What NEO device you are using? GTA01 or GTA02
>>
>> 2. Where is your location and what is your network provider? eg.
>> T-Mobile, San Francisco in USA
>>
>> 3. When you boot the NEO, how long it takes to register the network?
>> eg. in normal case, it should be able to register to a network in 1~2
>> minutes immediately.
>>
>> 4. What is your GSM firmware version? you can get this number by an AT
>> command. Using SSH to your NEO, then type this command:
>>
>> [EMAIL PROTECTED]:~# libgsmd-tool -m atcmd
>> libgsm-tool - (C) 2006-2007 by Harald Welte and OpenMoko, Inc.
>> This program is Free Software and has ABSOLUTELY NO WARRANTY
>>
>> AT+CGMR
>> STR=`AT+CGMR'
>> RSTR=`+CGMR: "HW: GTA02BV5, GSM:
>> gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-Moko6"'
>>
>> 5. What is your IMEI code? by this AT command like previous steps.
>> AT+CGSN
>> STR=`AT+CGSN'
>> RSTR=`+CGSN: 000000000000000'
>>
>> 6. if NEO takes over 3 minutes to register to the network or it just
>> re-register to the network again and again. Please attach your gsm log
>> file ('/tmp/gsm.log') to our bugzilla, we already created a bug for
>> this issue.
>> http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1024
>>
>>
>> PS. Check our wiki site, if you have problems on these stuff.
>>
>> How to use SSH on NEO:
>> http://wiki.openmoko.org/wiki/USB_Networking
>> How to use libgsmd-tool:
>> http://wiki.openmoko.org/wiki/Gsmd
>>
>>
>> Best Regards,
>> Erin
>>
> 


_______________________________________________
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Reply via email to