Michael Shiloh ha scritto:
A generic solution can be built this way:
1. Locate a generic USB car charger e.g.
http://www.daydeal.com/product.php?productid=10892. Make sure it can
supply at least 1A. Note in my example that the specs don't say this,
but if you look at the picture carefully you can read the 1A on the
label. They are very common. I think I found one for less than $2.00.
2. Purchase a standard USB A to Mini B cable,e.g.
http://www.cablesforless.com/index.asp?PageAction=VIEWPROD&ProdID=14660.
These too are common. I have about 4 left over from digital cameras. You
can probably get them for free by asking your friends and relatives.
3. Carefully slice open the cable and solder in the appropriate resistor
between the appropriate conductors (someone needs to document this)
Why not simply connecting the official Openmoko usb cable to the car usb
charger?
Will it need the mod you've figured at the point 3?
--
Treviño's World - Life and Linux
http://www.3v1n0.net/
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
