On Monday 02 June 2008 15:11:17 Bin Chen wrote: > On Mon, Jun 2, 2008 at 9:04 PM, Michael 'Mickey' Lauer > > <[EMAIL PROTECTED]> wrote: > > On Monday 02 June 2008 11:34:07 Bin Chen wrote: > >> I am just looking at the code of gsmd2, I doubt whether a condition > >> has been processed. Suppose a command is send but during the wait time > >> of the response, another unsolicited command sent to the AP and the > >> name is the same: > >> > >> AT+CREG? > >> > >> +CREG: 2 (1) > >> > >> +CREG: 0,1 (2) > >> > >> The (1) is an unsolicited command from BP side but the (2) is the > >> actual response for the AT+CREG? command, if this case happens, has > >> gsmd2 processed it correctly? > > > > I don't know about gsmd2 offhand, however in general there are two ways > > to deal with this problem: > > > > 1.) Disable sending unsolicited responses between commands. There's a > > 07.07 command to control that. > > > > 2.) Allow sending unsolicited responses at all times (this is better for > > latency) and dedicate an own GSM channel for unsolicited responses. > > How to? If enable this maybe the 07.10(MUX) must be enabled?
Correct. ophoned uses the Calypso in MUX mode by utilizing gsm0710muxd. :M: _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
