sorry for the third post, here's some hcidumps from both pc and freerunner while havin remoko on
# hcidump (from pc) HCI sniffer - Bluetooth packet analyzer ver 1.41 device: hci0 snap_len: 1028 filter: 0xffffffffffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 > ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 < ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 < HCI Command: Disconnect (0x01|0x0006) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Disconn Complete (0x05) plen 4 hcidump (from freerunner) HCI sniffer - Bluetooth packet analyzer ver 1.38 device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < ACL data: handle 42 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > ACL data: handle 42 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Disconn Complete (0x05) plen 4
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community