On Wednesday 01 October 2008 07:51:48 am Valerio Valerio wrote: > Hi, > > 2008/10/1 Flyin_bbb8 <[EMAIL PROTECTED]> > > > ok i don't know if this might be useful but the line "--> BlueZ input > > service started" is only showin in the terminal through ssh after i press > > the X button > > this is the normal behavior, ReMoko stop the input service because use the > same channels to send information, on exit ReMoko restore the initial > conditions of the system. > The weird thing is that your system try to connect on the psm 1 ( L2CAP(s): > Connect req: psm 1 scid 0x0040), and the HID psm are the 17 and 19, which > version of BlueZ do you have on your system ? > > Best regads,
Sorry for beeing absent on this thread for so long... I run into the exact same issues as described so far. Here is the data on my bluez installation (standart setup for an openSuSE 11.0 install): bluez-libs: 3.32-3.2 (Tue 15 Jul 2008 12:36:04 PM EDT) bluez-utils: 3.32-8.2 (Tue 15 Jul 2008 09:25:35 PM EDT) Thanks a lot for your help, Valerio. Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community