Hi, I've found out that the echo suppression works only one time after qpe was started. At least this applies to me.
Phone: freerunner (gta02) Dist: OM2008.09 gmshandset.state: http://www.teaparty.net/technotes/data/gsmhandset.state "grep AT%N0187 libficgta01vendor.so" gives me a match. So I assume that Florians patch got into OM2008.9 Here is a step by step list of how it behaves to me: 1. Boot the freerunner 2. Make a call -> no echo 3. Hang up 4. Make a call -> echo 5. Hang up 6. /etc/init.d/xserver-nodm restart 7. Make a call -> no echo 8. Hang up 9. Make a call -> echo . . . With the above state file I was able to bring up the "Speaker" volume up to 100% without hearing any echo on step 2 and 7. The volumes on both sides were very good. On step 4 and 9 I could only bring up the "Speaker" volume to 79%. Above 79% the echo came back. So it seems that the echo suppression command (AT%N0187) gets reset after every call. Can anyone confirm this? -- View this message in context: http://n2.nabble.com/Echo-issue-on-OM2008.08-solved-tp793913p1301265.html Sent from the Openmoko Community mailing list archive at Nabble.com. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
