On Mon, Oct 6, 2008 at 10:17 AM, Daniel Nöthen <[EMAIL PROTECTED]> wrote:
> > Hi, > > I've found out that the echo suppression works only one time after qpe was > started. At least this applies to me. > > Phone: freerunner (gta02) > Dist: OM2008.09 > gmshandset.state: http://www.teaparty.net/technotes/data/gsmhandset.state > > "grep AT%N0187 libficgta01vendor.so" gives me a match. > So I assume that Florians patch got into OM2008.9 > > Here is a step by step list of how it behaves to me: > 1. Boot the freerunner > 2. Make a call -> no echo > 3. Hang up > 4. Make a call -> echo > 5. Hang up > 6. /etc/init.d/xserver-nodm restart > 7. Make a call -> no echo > 8. Hang up > 9. Make a call -> echo > . > . > . > > > With the above state file I was able to bring up the "Speaker" volume up to > 100% > without hearing any echo on step 2 and 7. > The volumes on both sides were very good. > On step 4 and 9 I could only bring up the "Speaker" volume to 79%. > Above 79% the echo came back. > > So it seems that the echo suppression command (AT%N0187) gets reset after > every call. > > Can anyone confirm this? > I had noticed the echo came back for some calls but didn't see the pattern. I have retested and it seems you are correct that it needs to be done for every call. Angus
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
