Vasili Sviridov wrote: > Ok, that made it even worse :( > > Now I only have NOR uBoot and dfu-util still gives me only 1 alternate > there which is "USB Device Firmware Upgrade". > Cannot flash the NAND uBoot, since dfu-util does not see the required > partition...
Don't pay too much attention to the "dfu-util -l" output - there are two different modes the device can be in, and in the default one you don't see the other alternate settings listed. When you run the dfu-util Download command it should automatically set the device into the required mode. If it fails then try running the exact same command a second time - sometimes it fails on the first try. _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community