Mike Montour wrote:
Vasili Sviridov wrote:
Ok, that made it even worse :(
Now I only have NOR uBoot and dfu-util still gives me only 1 alternate
there which is "USB Device Firmware Upgrade".
Cannot flash the NAND uBoot, since dfu-util does not see the required
partition...
Don't pay too much attention to the "dfu-util -l" output - there are two
different modes the device can be in, and in the default one you don't
see the other alternate settings listed. When you run the dfu-util
Download command it should automatically set the device into the
required mode. If it fails then try running the exact same command a
second time - sometimes it fails on the first try.
Thanks, what's the good version of NAND uBoot to flash?
V.
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
