Hi, I have a SMDK6410 board. I have successfully compiled dfu-util, Qi, and Openmoko kernel on my Ubuntu machine.
The SMDK6410 is just as I got it from the company, I haven't modified its firmware. I have connected it to my computer with a USB cable, that goes into the OTG USB host port on the board (This is how the Windows DNW utility transfers a Win CE image to the board). So, when I use dfu-util to try to burn the Qi image into it, I get the following error: r...@conectech-desktop# ./dfu-util -a u-boot -R -D../qi/image/qi-s3c6410-master_84e38630c7135c1f.udfu dfu-util - (C) 2007-2008 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY No DFU capable USB device found ---------------------------------------------------------------------------------------------------------------------------------------- Can you please tell me how to transfer the boot loader and the kernel to the NAND? I also have an Olimex OCD (that connects to the JTAG interface on the board) , if it is needed anyway. Thanks, Tarandeep On Fri, Oct 31, 2008 at 12:45 AM, Andy Green <[email protected]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Somebody in the thread at some point said: > | On Thu, 30 Oct 2008 11:35:40 +0100 > | Petr Vanek <[email protected]> (PV) wrote: > | > |> On Thu, 30 Oct 2008 10:26:00 +0100 > |> "arne anka" <[email protected]> (AA) > |> wrote: > |> > |>>> I have tried it and i liked it. It was definitively faster. I might > |>>> stick with it for a while i hope. > |>> how does it play with the dead battery issue? > |> > |> well, this i cannot answer as i have three batteries and just swap them > |> around... i can try to run one completely empty and see what happens. > |> > | > | seems like no luck with empty battery, but i hadn't have much time to > | test. and, for some reason, i cannot Qi boot my SD located distro. > | Results on NAND based distro give me today the same or almost longer > | booting times. The original Qi from Andy was definitely faster. > | > | Someone mentioned sound issue... right, seems to be that way too - no > | sound, but i haven't tested it thoroughly now. > | > | I had been using older qi from Andy and i am not sure, but think that > | it didn't suffer these issues... well, let's wait, it's still fresh. > > The sound thing is a kernel issue I believe. Up in stable-tracking > branch of kernel the upstream init of the codec chip is done differently > now and I think this is resolved. But stable-tracking has some issues > being worked on that stop it replacing stable right now. > > The empty battery thing on GTA02 A5 anyway is a hardware issue that is > happening before the CPU is booted, so Qi can't directly affect it. It > can indirectly affect it though, when it does run it enables charging > immediately. > > - -Andy > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.9 (GNU/Linux) > Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org > > iEYEARECAAYFAkkKm5QACgkQOjLpvpq7dMo5YQCeIp88JA+JN/PJypeIQxg/fFU6 > agQAnRcAelL2uAg4qRQU7EC7kqrzGlak > =uTZ7 > -----END PGP SIGNATURE----- > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
