Helge Hafting <[email protected]> writes: > Did you flash Qi to both NAND flash and NOR flash?
Flashing NOR is impossible without debug board or messing with hardware. > But you have a working image, and linux has device drivers > for flash devices. ( /dev/mtd* ) Reading them is no problem. > > So I believe it is possible to overwrite a flash device while linux is > running. It had better not be the rootfs, but boot flash is a different > device. > > Maybe it is as simple as "cat imagefile > /dev/mtdsomething" > Get some detailed advice about this though - don't experiment. Don't dare to try that! There're working instructions on the wiki how to flash NAND from a running system: http://wiki.openmoko.org/wiki/Flashing_the_Neo_Freerunner#Alternative:_using_nandwrite . HTH -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
