On Sun, 22 Feb 2009 17:23:10 +0530 Carl Lobo <carll...@gmail.com> wrote:
> Using SCORouting=HCI is what you would do on a standard laptop to get > the headset working. After setting up using ~/.asoundrc using > bluetooth as the name for the headset config I can use the headset on > my laptop with something like > arecord -D bluetooth -f S16_LE | aplay -D bluetooth -f S16_LE > works - as in I could hear my own voice through the earplug of the > bluetooth headset (I had tried this a long while back with bluez > 3.3[63] I think). The same thing did not work on the FR. I tried this now as well, but it fails with ALSA lib pcm_bluetooth.c:1593:(bluetooth_init) BT_GETCAPABILITIES failed : Unknown error 240(240) aplay: main:546: audio open error: Unknown error 240 Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono Warning: rate is not accurate (requested = 8000Hz, got = 16000Hz) please, try the plug plugin (-Dplug:bluetooth) (although I hear that the headset does something). It also fails with -Dplug:bluetooth. However, this way, I'm able to play back oggs with mplayer (choppy), so it's doing something right at least. > After that > > mdbus -s org.bluez /org/bluez/1387/hci0/dev_00_21_3C_07_5E_8E > org.bluez.Headset.Connect I didn't get this working though, I get Connect failed: org.freedesktop.DBus.Error.UnknownMethod when trying various combinations of paths there. // Simon _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community