On Sun, 22 Feb 2009 19:48:33 +0100 Simon Kagstrom <simon.kagst...@gmail.com> wrote:
> Since the mic on the bluetooth headset works, I presume that the > basic setup should be OK, but that the controls are somehow wrong. > [...] > Could the "Digital filters" block can be setup wrong and effectively > mute outgoing sound? One more datapoint: /sys/devices/platform/soc-audio/dapm_widget contains the values below, and the difference compared to gsmhandset.state is only these: --- /tmp/standard Sun Feb 22 20:31:29 2009 +++ /tmp/bt Sun Feb 22 20:39:53 2009 @@ -1,9 +1,9 @@ Handset Spk: Off Handset Mic: Off Headset Mic: Off -GSM Line In: Off -GSM Line Out: Off -Stereo Out: On +GSM Line In: On +GSM Line Out: On +Stereo Out: Off Mic 2 Volume: Off Mic 1 Volume: Off ALC Mixer: Off which seems a bit *too* small to me. In particular, I'd like "Right Capture Volume" and/or "Left Capture Volume" to be set to on instead. >From looking at the diagram, I think that would make sense at least. I haven't figured out how to affect these still from looking in the state file and in the driver though. // Simon Handset Spk: Off Handset Mic: Off Headset Mic: Off GSM Line In: On GSM Line Out: On Stereo Out: Off Mic 2 Volume: Off Mic 1 Volume: Off ALC Mixer: Off Right Capture Volume: Off Left Capture Volume: Off Right ADC: Off Left ADC: Off Playback Mixer: Off Out 4: Off Out 3: Off Out3 Left + Right: Off Voice DAC: Off Mono Out 2: Off Mono Out 1: Off Mono Mixer: Off Right DAC: Off Right Out 2: Off Right Out 1: Off Right Mixer: Off Left DAC: Off Left Out 2: Off Left Out 1: Off Left Mixer: Off Mic Bias: Off PM State: Standby _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
