On Sun, Jul 26, 2009 at 01:57:27PM +0200, pike wrote: > Since this week, my battery isnt charging to the fullest anymore. > This didnt just gradually change, but happened 'all of a sudden'. > It charges - connected to the charger - up to ~50% of its capacity > and doesnt seem to go any further.
I've seen that too, except it would only charge to 40 % or 3.8 V. It did not "fix" itself over a few days. Eventually, I shut down the FR, removed battery and external power and let it sit there for 5 minutes. When I put the battery back in and reconnected external power, it charged just fine. I took dumps of /sys/.../pcf50633.../dump_all_regs during the problem and compared them to dumps taken when I got it to charge fully again, but nothing showed up. The only thing I can think of that might have provoced the problem is that I was experimenting with modulation of the vibrator "brightness". Something like this: # for i in {,1,2,1,,1,2,1,,1,2,1,}50 0; do \ echo >/sys/class/leds/neo1973\:vibrator/brightness $i; \ sleep 0.2; done That's not neccesarily a wise thing to do, but the schematics seems to have all the required protection components around the vibrator motor. -- Rask Ingemann Lambertsen Danish law requires addresses in e-mail to be logged and stored for a year _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community