> > Can you telnet or nc to localhost port 2947, i.e. either: > > telnet localhost 2947 > or > nc localhost 2947 > > and if this succeeds, type 'r' followed by enter. You should see > somthing like this: > > ~$ telnet localhost 2947 > Trying ::1... > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > r > GPSD,R=1 > $GPRMC,132008.000,A,4340.8841,N,00713.9172,E,3.60,221.79,271109,,,D*6B > $GPRMC,132009.000,A,4340.8829,N,00713.9156,E,7.42,221.99,271109,,,D*68 > . > . > .
It only says: GPSD,R=1 > If you have internet connection on your QtMoko, you can try the > following too: in the config put in 88.191.100.245 as IP for the GPSD > and hit the change button. You should get GPS data for the south of > France. Yes, that shows me that i'm in France. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
