On Tue, Jun 1, 2010 at 4:48 AM, Radek Polak <[email protected]> wrote: > Hi, > new QtMoko images v24 are out! You can download from our sourceforge [1] > or visit our homepage [2][3].
Now that I have been trying V24 for some days, I can confirm the following: 1. I now have good call volumes and no distortion after setting audio values via neocontrol and they are remembered across reboots if you use the save option. Very happy. 2. Power Management - does not detect current state .e.g. battery or AC. When AC plugged in, still says "on battery" - after suspend, state shows "locked" despite never going to lock. If one goes to lock and then unlocks, power mgmt still shows state as locked. Locked state goes to battery after attaching usb cable and charging starts. 3. Unfortunately and the biggest show stopper for me, is I am still experiencing sporadic GSM connectivity issues. This is not new though, afaik this started as an issue sometime after v16. It would be interesting to see if anyone else experiences these or knows a workaround. If you want me to provide logs or you want to give me step by step instructions for test cases, I'm happy to be a guinea pig to resolve these issues once and for all: - sometimes stays "searching for network", multiple restart of QT does not clear it even when 3 bars or better are shown in signal meter on left. - sometimes after device reboot "no network" but then seems to connect, however sometimes shows signal and carrier but cannot establish outbound calls and inbound calls can't get through. Obviously same for SMS. - currently there does not appear to be any relationship to suspend cheers Denis _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
