To: [email protected] Subject: Re: QtMoko v30; UBIFS; can't boot Date: Mon, 27 Dec 2010 03:30:57 +0300 X-Mailer: Sylpheed-Claws 2.6.0 (GTK+ 2.8.20; i486-pc-linux-gnu) Organization: MoniCar
> Btw, don't know where this is set in qi, but you may try u-boot: > http://wiki.openmoko.org/wiki/U-boot-gena2x Thank you for your replies. I don't want to go back to u-boot. I think my problem started after I'v installed debian to SD per instructions found at http://wiki.debian.org/DebianOnFreeRunner with install.sh(http://pkg-fso.alioth.debian.org/freerunner/install.sh). I'v told the install.sh to configure Qi. Probably that was the mistake. Now I'm trying to figure out what can be configured wrong. I'v read the script... Its long... Can't find anything suspicious. According to this: http://wiki.openmoko.org/wiki/Qi#Installation Qi...is mount the "identity" partition and get from there the globally unique MAC address for the USB over Ethernet function instead of the random one that is otherwise used (If this doesn't work (like with a GTA01) you may use kernel-commandline parameters g_ether.dev_addr= and g_ether.host_addr= for the mac in device and host mode of the usb-ether module). bad kernel options can be in "identity" or in u-boot environment partitions. QtMoko v30 booted from SD. neo:~# cat /proc/mtd dev: size erasesize name mtd0: 00200000 00010000 "physmap-flash.0" mtd1: 00040000 00020000 "qi" mtd2: 00040000 00020000 "depr-ub-env" mtd3: 00800000 00020000 "kernel" mtd4: 000a0000 00020000 "depr" mtd5: 00040000 00020000 "identity-ext2" mtd6: 0f6a0000 00020000 "rootfs" mount -t ext2 /dev/mtdblock5 p1 ls p1 bt imei lost+found sn usb wlan echo 'rootflags=compr=zlib' > p1/append-GTA02 No joy. Same result: kernel complains that lzo is not compiled in. Maybe it misses some modules? Maybe I shell put them in "identity-ext2"? Have to research more... BTW tried Gennadys script to decode u-boot environment(http://www.bsdmn.com/openmoko/gpsfix/env/envedit.pl). It complains that crc32 function is not defined. Can I modify u-boot environment from QtMoko running from SD? _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
