Thanks for the reply Ed. My gta02 boots every 10 sec and the last messages seen before boot is in the image : http://imagepaste.nullnetwork.net/viewimage.php?id=1848
The images i used for kernel and qi where from: http://sourceforge.net/projects/qtmoko/files/ I took the kernel from: qtmoko-debian-v31.tar.gz after extracting it in a local folder. Also if its usefull: #mke2fs /dev/sde1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 486720 inodes, 1946368 blocks 97318 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1996488704 60 block groups 32768 blocks per group, 32768 fragments per group 8112 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Writing superblocks and filesystem accounting information: done Στις Σάββατο 26 Φεβρουάριος 2011 01:14:02 Ed Kapitein γράψατε: > On 02/25/2011 10:08 PM, Πρεκατές Αλέξανδρος wrote: > > Having spend a day and some trying to boot qtmoko or shr trying different > > combinations (bootloader+ distributions + partition scheme ) from two > > micro sd card i own, without any success , and since the cards are > > accesible from linux kernel i'd like to pledge for help in that issue. > > I admit i havent play more with uboot enviroment and uboot prompt but > > i've tries the rootdelay option................... > > Hi Alexandros, > > I use sd cards to run a distro and it works "fine" ( there are some > problems with the speed an reliability ) I would suggest to format the sd > card as one partion with ext2 (on a pc with a sd card reader for example) > and put the qtmoko kernel in the /boot directory of the card and name it > uImage-GTA02.bin. > > And write "console=tty0 loglevel=3 rootwait panic=10 > glamo_mci.sd_max_clk=5000000 glamo_mci.sd_post_power_clock=5000000 > glamo_mci.sd_slow_ratio=16" in /boot/append-GTA02 > > Could you please report back what happens when you try to boot then from > the SD card. It should start a kernel and panic at the end loading the > kernel. ( there is no init yet) Please hold the power button to get some > diagnostics printed on your screen. > > Kind regards, > Ed > > cut and paste: > mke2fs /dev/sdb1 ( assuming /dev/sdb is your sd card ) > mkdir /tmp/mpt > mount /dev/sdb1 /tmp/mpt > mkdir /tmp/mpt/boot > cp /some/place/qtmoko_kernel /tmp/mpt/boot/uImage-GTA02.bin > echo "console=tty0 loglevel=3 rootwait panic=10 > glamo_mci.sd_max_clk=5000000 glamo_mci.sd_post_power_clock=5000000 > glamo_mci.sd_slow_ratio=16" > /tmp/mpt/boot/append-GTA02 umount /tmp/mpt > eject /dev/sdb > > put the card in the freerunner and boot using qi. _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
