Hi Alexandros, Good to hear that! Please try some other values for the clock settings in /boot/append-GTA02, and some smaller values for the slow_ratio setting. i think the system will be slow now, adjusting these values might make your freerunner faster. (or instable ;-) )
Kind Regards, Ed On 02/27/2011 02:27 PM, Πρεκατές Αλέξανδρος wrote: > Qi booted qtmoko from my sdcard in gta02 successfully . > Thank you for the detailed instructions. > > Alexandros > > > Στις Κυριακή 27 Φεβρουάριος 2011 00:23:11 Ed Kapitein γράψατε: > >> Hi Alexandros, >> >> Well, it seems good, the freerunner regonizes the card and loads the >> kernel. The kernel panic is as expected, there is just a kernel on the >> card and no distro yet. Could you try to install the root files system >> from [2] ? >> After you installed it make sure to install the kernel in /boot as >> uImage-GTA02.bin and add the /boot/append-GTA02. >> (you could make a tar file before installing the rootfs) >> >> in cut and paste style: >> mkdir /tmp/mpt >> mount /dev/sde1 /tmp/mpt >> cd /tmp/mpt >> tar -czf /tmp/old_boot.tgz ./boot >> tar -xzvpf /the/downloaded/qtmoko-debian-v31.tar.gz >> tar -xzvpf /tmp/old_boot.tgz >> cd / >> umount /tmp/mpt >> eject /dev/sde >> >> put the card in the freerunner and boot using qi >> That should give you a working distro. >> Please let us know any success/failure! >> >> Kind regards, >> Ed >> >> [2] >> http://sourceforge.net/projects/qtmoko/files/qtmoko-debian-v31.tar.gz/down >> load > _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
