> > I didn't see instructions for using ubi images. > > I have instead tried uSD card installation. I installed qi bootloader, > and formated a Trascend 4GB SDHC card with ext3 format, and then > uncompressed full-om-gta02.tar.gz file on it. > > But when I load from qi, the card seems to not work. I have used the > rootdelay=5 as Qi article says, but after 5 seconds it seems not to be > able to read the card, and the kernel panics.
I tried a lot of combinations, but I can't boot. This is what I get, I expect there aren't errors as I have typed it by hand: mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 USD 3.74 GiB mmcblk0: unknown partition table Waiting 5sec before mounting root device... VFS: Cannot open root device "mmcblk0p1" or unknown-block(179,1) Please append a correct "root=" boot option; here are the available partitions: 1f00 2048 mtdblock0 (driver?) 1f01 256 mtdblock1 (driver?) 1f02 256 mtdblock2 (driver?) 1f03 8192 mtdblock3 (driver?) 1f04 640 mtdblock4 (driver?) 1f05 256 mtdblock5 (driver?) 1f06 252544 mtdblock6 (driver?) b300 3939112 mmcblk0 driver: mmcblk Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(179,1) On my append-GTA02 I have: rootdelay=5 rootfstype=ext2 loglevel=8 quiet splash
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
