Hi, list.
There are 2 covers for gta02 made of plastic and are too thick (~ 2.5
mm).
If it were possible to make them out of aluminum (0.5-1mm), we would
have
a slim and elegant case for our phone.. No other changes needed..
Dr. H. Nikolaus Schaller писал 12.12.2011 12:04:
Am 12.12.2011 um 09:51 schrieb Patryk Benderz:
Dnia 2011-12-11, nie o godzinie 23:36 +0100, Fernando Martins pisze:
Hi,
Out of curiosity would it be possible to recover the original
moulds
used to produce the cases?
Anybody knows what happened to them?
Good question, however moulds are designed to produce certain amount
of
cases. Looking at how much was made, moulds can be at end of their
lives.
AFAIK they have been made in 2006 or 2007 for the Neo1973 (and have
been slightly modified for the GTA02). So I think they have been made
within FIC and since FIC was finally the manufacturing subcontractor
of
Openmoko, Inc. I think they could be somewhere within FIC. Or have
been
scrapped there after some years of not being used.
Anyways, they aren't of big help since the components inserted into
the
case (earpiece, vibracall motor, speaker) are no longer produced
or available.
So we have to go the painful way of designing our own cases. But the
good side is that we can improve on the outer shape and look&feel.
Nikolaus
_______________________________________________
Openmoko community mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________
Openmoko community mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/community
